Electricians in Rapid City, SD
Licensed electricians serving Rapid City, South Dakota. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Top Rated Electricians in Rapid City
American Electric, Inc.
Local, family-owned full-service electrical contractor at 1525 E Centre Street in Rapid City with more than 40 years of service across the Black Hills. Handles new home construction, remodel wiring, troubleshooting, code inspections, lighting, and low-voltage cabling.
Formanek Electric
Local family electrician based at 1220 Creek Drive in Rapid City. BBB-accredited and four-time Best of the Black Hills electrician (2020-2023). Licensed and insured, offering free estimates on residential new construction, service upgrades, security, and outdoor lighting.
Simonds Electric
Rapid City electrical contractor founded in 2014 serving residential and commercial customers across the Black Hills. Handles new residential construction, routine maintenance, emergency repairs, voice/data/video cabling, and alternative energy systems.
Kilowatt Electric
Locally owned full-service electrical contractor at 2021 Marlin Drive in Rapid City, serving the Black Hills since 1982. Handles new home wiring, remodels, residential lighting, LED retrofits, perimeter lighting, and ongoing repair and maintenance.
Mick's Electric Inc.
LicensedVeteran-owned electrical contractor at 1304 Oregon Street in Rapid City, founded in 1987 and licensed under SD Electrical License EC1265. Two-time Best of the Black Hills electrician (2024 and 2025) serving Rapid City, Box Elder, Sturgis, Spearfish, and surrounding Black Hills towns.
Beatty Electric
Second-generation family-owned electrical contractor at 1665 Samco Road in Rapid City, established in 1975. Serves the Black Hills with new and existing home wiring, custom lighting, remodel work, and outdoor lighting, backed by a one-year guarantee.
Swiftec Inc.
EV CertifiedRapid City electrical contractor founded in 2005 with offices at 1714 Creek Drive in Rapid City and 504 Glenn Street in Wall. Provides residential service including fixture and outlet installs, smoke alarms, home wiring inspections, remodel work, communications cabling, and EV chargers.
Conrad's Big C Electric
Rapid City electrical contractor at 1750 E. North Street, providing residential, commercial, and industrial electrical work since 1983. Handles simple home repairs through complex installations across the Black Hills area.
Are you an electrician in Rapid City?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in Rapid City
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician
Most states require a state-issued electrical license. Always ask for the license number, confirm it matches the person doing the work (not just the business owner), and check it against the issuing board's online lookup. - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder, before any work begins. Without workers comp, an injured worker can sue the homeowner directly. $500K–$1M general liability is standard. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in Rapid City
Follow these steps to find a reliable, licensed electrician in the Rapid City, South Dakota area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Electrical Costs in Rapid City, SD
Typical prices for residential electrical work in Rapid City. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $60-$126 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $134 | $172 | $227 |
| New outlet install | $163 | $209 | $276 |
| Ceiling fan replacement | $218 | $279 | $368 |
| 200A panel upgrade | $2,031 | $2,604 | $3,437 |
| Level 2 EV charger install | $1,197 | $1,535 | $2,026 |
| Generator transfer switch | $980 | $1,256 | $1,658 |
| Whole-house rewire (1,800 sq ft) | $7,979 | $10,230 | $13,504 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in Rapid City typically run $56-$326.
Get a Detailed Cost EstimateElectrical Permit Requirements in Rapid City
Nearly all electrical work in Rapid City requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $56-$326. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in Rapid City, South Dakota?
Electricians in Rapid City typically charge $60-$126 per hour, with a minimum service call fee around $134-$227. Job-based pricing is more common than hourly for installs: adding an outlet runs $163-$276, a ceiling fan swap runs $218-$368. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in Rapid City?
Upgrading from a 100-amp to a 200-amp service panel in Rapid City typically costs $2,031-$3,437, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $4,468. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in Rapid City?
Level 2 EV charger installation in Rapid City runs $1,197-$2,026 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in Rapid City?
Yes. Nearly all electrical work in Rapid City requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $56-$326 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in South Dakota?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In South Dakota, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in Rapid City, a master electrician must be on the license — confirm this before signing a contract.