Electricians in Sioux Falls, SD
Licensed electricians serving Sioux Falls, South Dakota. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Top Rated Electricians in Sioux Falls
Sorlien Electric
Family-owned and operated electrical contractor wiring homes in the Sioux Falls area since 1984. Based just outside Sioux Falls in Tea, with services covering home theater wiring, custom lighting, ceiling fans, backup power, and security automation throughout the Sioux Empire.
D & D Electric
Sioux Falls electrician serving homes in Sioux Falls, Brandon, Harrisburg, Tea, Hartford, and Dell Rapids. Licensed, bonded, and insured, with services ranging from new home wiring and remodels to panel upgrades, code upgrades, and Generac generator installation.
Travis Electric Inc.
EV CertifiedFamily-owned, licensed, insured, and bonded electrical company headquartered just outside Sioux Falls in Hartford with 25+ years of experience. Serves Sioux Falls residential and commercial clients with new builds, remodels, panel upgrades, EV charger installation, and recessed lighting.
Baumgartner's Electric
Multi-generation Baumgartner family electrical contractor based in Sioux Falls and serving the surrounding area since 1914. Handles full-scope residential and commercial electrical work from a 1601 West 1st Street headquarters with more than a century of local service.
SV Electric
EV CertifiedLocally owned electrical contractor with 25+ years of experience serving Sioux Falls and the surrounding area from a Tea, SD shop. Focuses on residential service: panel upgrades, lighting, EV chargers, generators, and whole-home surge protection, with a one-year labor warranty.
Action Electric
Sioux Falls electrical contractor founded in 1947 and based at 5200 West 9th Street. Provides complete residential service including new and remodel home wiring, lighting and ceiling fans, electrical diagnosis, and 24/7 emergency repair across the Sioux Falls metro.
Frisbees Plumbing, Heating, AC & Electrical
Family-owned full-service contractor serving Sioux Falls, Harrisburg, Tea, Brandon, and surrounding areas since 1960. Electrical division installs outlets and switches, interior and exterior lighting, ceiling fans, panel upgrades, basement finishing wiring, and hot tub circuits from a 4009 S. Minnesota Avenue location.
Prairie Electric Construction
EV CertifiedFamily-owned and operated Sioux Falls electrical contractor founded in 2017. Owner-on-every-jobsite shop providing residential installations, repairs, rewiring, panel upgrades, EV charger and backup generator installation, home automation, and 24-hour emergency service.
Great Plains Electric
Family-owned Sioux Falls electrical contractor handling residential, commercial, and agricultural work. Services include troubleshooting, panel changeouts and upgrades, remodel and new construction wiring, underground trenching, and overhead line installation and repair.
Are you an electrician in Sioux Falls?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in Sioux Falls
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician
Most states require a state-issued electrical license. Always ask for the license number, confirm it matches the person doing the work (not just the business owner), and check it against the issuing board's online lookup. - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder, before any work begins. Without workers comp, an injured worker can sue the homeowner directly. $500K–$1M general liability is standard. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in Sioux Falls
Follow these steps to find a reliable, licensed electrician in the Sioux Falls, South Dakota area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Electrical Costs in Sioux Falls, SD
Typical prices for residential electrical work in Sioux Falls. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $60-$126 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $134 | $172 | $227 |
| New outlet install | $163 | $209 | $276 |
| Ceiling fan replacement | $218 | $279 | $368 |
| 200A panel upgrade | $2,031 | $2,604 | $3,437 |
| Level 2 EV charger install | $1,197 | $1,535 | $2,026 |
| Generator transfer switch | $980 | $1,256 | $1,658 |
| Whole-house rewire (1,800 sq ft) | $7,979 | $10,230 | $13,504 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in Sioux Falls typically run $56-$326.
Get a Detailed Cost EstimateElectrical Permit Requirements in Sioux Falls
Nearly all electrical work in Sioux Falls requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $56-$326. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in Sioux Falls, South Dakota?
Electricians in Sioux Falls typically charge $60-$126 per hour, with a minimum service call fee around $134-$227. Job-based pricing is more common than hourly for installs: adding an outlet runs $163-$276, a ceiling fan swap runs $218-$368. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in Sioux Falls?
Upgrading from a 100-amp to a 200-amp service panel in Sioux Falls typically costs $2,031-$3,437, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $4,468. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in Sioux Falls?
Level 2 EV charger installation in Sioux Falls runs $1,197-$2,026 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in Sioux Falls?
Yes. Nearly all electrical work in Sioux Falls requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $56-$326 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in South Dakota?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In South Dakota, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in Sioux Falls, a master electrician must be on the license — confirm this before signing a contract.